How to Clean a Burnt Pot with Baking Soda
Baking soda lifts most burnt food off a pot in about 30 minutes of soaking, and you don’t need to scrub hard. Cover the burnt area with water, add 2 to 4 tablespoons of baking soda, then simmer for 10 minutes on the stove. That’s the fix I used for years on the line, and it still works in my home kitchen.
How to Clean a Burnt Pot With Baking Soda

- Scrape out what’s loose. Tip out the food and use a wooden spoon to lift anything sitting on top. Don’t press hard on dry burnt patches — you’ll scratch the base.
- Add water and baking soda. Pour in enough water to cover the burnt ring, then stir in 2 tablespoons of baking soda for a small pot, 4 for a large one. For heavy burns, use the larger amount of baking soda and give it a second simmer — don’t add vinegar, which neutralizes the baking soda and cancels its cleaning action.
- Simmer for 10 minutes. Put the pot back on the stove over low heat. Keep it at a gentle bubble, not a rolling boil, so the liquid doesn’t climb the sides and dry out.
- Take it off and wait. Turn off the heat and leave the pot to sit for 15 to 20 minutes. The burnt layer softens and starts to lift on its own.
- Scrub with a soft pad. Use a nylon scrubber or a plastic scraper. Most of the burn slides off here. A metal scouring pad takes the shine off stainless steel and ruins nonstick coatings.
- Repeat once if needed. For thick black patches, pour out the dirty water, add fresh water and baking soda, and simmer again for 10 minutes.
- Wash and dry. Wash the pot normally with dish soap, rinse well, and dry it fully before you put it away.
Tip: If the burnt layer still won’t move after two rounds, switch to a commercial cleaner made for cookware and follow its label — don’t reach for a knife.
How Long It Takes and How Much Baking Soda to Use
| Pot size | Baking soda | Simmer time | Soak time | Total |
|---|---|---|---|---|
| Small (1–2 qt) | 2 tbsp | 10 min | 15 min | About 30 min |
| Medium (3–4 qt) | 3 tbsp | 10 min | 20 min | About 35 min |
| Large (5 qt+) | 4 tbsp | 10 min | 20 min | About 40 min |
| Heavy, black burn | 4 tbsp | 10 min, twice | 20 min | About 1 hour |
When This Method Won’t Work
Baking soda works on burnt food and grease, but it can’t undo damage to the pot itself. If the surface is scratched, flaking, or the coating is coming off, that’s a different problem.
Nonstick pots are the tricky case. If the coating is blistered or peeling, no amount of soaking brings it back, and cooking on a damaged surface isn’t worth it. Enameled cast iron handles baking soda fine, but skip anything abrasive on it.
For aluminum, baking soda can darken the metal and leave a gray mark. That’s a cosmetic change, not a safety issue, but if the look matters to you, use a gentler dish soap instead. Stainless steel and plain cast iron take this method well.
Mistakes That Make It Worse

Can I use more baking soda to clean it faster?
No — more powder doesn’t burn food off faster. Extra baking soda just settles at the bottom and leaves a chalky film you’ll wash off later. Stick to the amounts in the table and give it the soak time instead.
Why does boiling hard damage the pot?
A fast, hard boil pushes starchy water up the sides, where it dries and bakes into a second burnt ring. Keep the heat low. You want a lazy simmer, not a rolling one.
Should I scrub while the pot is still hot?
Let it cool for a few minutes first. A hot pot plus a firm scrub is how people warp thin pans and burn their hands. Warm is fine; steaming hot isn’t.
Tip: Never pour cold water into a hot pan. The sudden change in temperature can crack enamel and warp thin metal.
Related guides
- Do I Need to Clean the Air Fryer Before First Use?
- Can I Use Vinegar to Clean an Air Fryer?
- Can You Use Baking Paper in an Air Fryer?
Frequently Asked Questions
Can I leave baking soda and water in the pot overnight?
Yes, and it’s often the easiest route for a badly burnt pot. Use cool water, add the baking soda, and leave it covered on the counter. The burnt layer softens overnight, so the morning scrub takes almost no effort.
Does baking soda work on a burnt nonstick pan?
It works only if the coating is still intact. If the nonstick surface is scratched, peeling, or blistered, cleaning won’t fix it — the pan is done. A damaged coating can flake into your food, so replace it rather than scrubbing harder.
What can I use if I don’t have baking soda?
You can also use a dishwasher tablet dissolved in hot water, or a commercial cookware cleaner. All three need the same soak time as baking soda.
Conclusion
Next time something burns, fill the pot with water and baking soda before you start scrubbing — the soaking does most of the work. If the burn is old and black, give it the overnight soak and let it sit. And if the coating is already damaged, put the money toward a new pot instead of a cleaner.

I’m passionate about helping home cooks make everyday cooking easier, smarter, and more enjoyable. I share practical kitchen tips, cookware guides, cooking tutorials, and simple recipe inspiration based on real kitchen experience and modern home cooking needs.
